Posts Tagged ‘computers’

Choosing A Home Laptop

17.10.2018
19:41
Comments Off on Choosing A Home Laptop

CHOICE OF HOME NOTEBOOK talking today about the best and benefit from selecting a home NB – ranging from budget laptops for multimedia, gaming, to the powerful “beast”. Finally, you a desire to buy a home laptop. Read more here: Laurent Potdevin. First you need to determine for themselves the targets of exploitation, whether you are going to use it for today’s video games or the level of simple games (casual). In the first turn recommend to see laptops with built-in or as they say the integrated video adapter, or to more expensive laptops with discrete ‘is not built-in graphics with its own memory. Speaking candidly Laurent Potdevin told us the story. And if you have the desire to play in modern video game quality, you will need to invest in a model of a modern high-level graphics card.

But do not worry, gaming laptop with good performance – not so unattainable thing. Laptops with integrated graphics notebooks in this category are from the budget class, however a few differences among them are: – Typically, the models with integrated graphics displays are used a resolution of 1280×800 pixels or 1280h768 with high contrast and wide viewing angles and thus pleasing image quality and color reproduction. – Laptops are more multimedia performance, as manned the Pentium and Celeron, and the older Sempron. Integrated video does not give the opportunity to play modern games, but old and not too demanding toys pull. – These laptops have a more attractive design than cheaper models. – Most of these notebooks have the ability to play audio and video without booting the operating system Windows. Yes, if you bought a laptop without this feature, you can buy it software for this useful function. Recommended Specifications: Processor: as in today’s video games you play do not count, then we recommend purchasing a laptop with an average Class: Intel Celeron M or Intel Pentium series.

The choice of processors is very large. More powerful processors will warm more, because of which will increase the noise level of cooling. Memory: for a modern PC will suffice, and 2 gigabytes. In fact, it is possible set and 3-4 gigabytes, but if you do not use resource-intensive applications, the difference is almost invisible. Screen: Home notebooks often have a display with a 16:9 aspect ratio. Do not forget to pay when buying attention to the quality of the display. We believe that the more important characteristics of the matrix is the pixel response time and viewing angles. Quite often, the modern models have a glossy screen coating, which increases contrast. Hard drive: Laptop hard drives priori slower than the desktop. We recommend that you pay attention to the hard drive in your laptop had a speed of 5400 rev / min, not less. Basically now a spindle speed in almost all hard drives. From Us: We can add that many home laptops come with a standard battery, whose work is about 3 hours without recharging. So if there is opportunity to take a laptop with long battery life, you should not neglect it. Well, pay attention to the laptop had a camera so as not to re-buy it in the future for video communication on the Internet.

The IBM Rational Robot IBM

19.09.2018
20:12
Comments Off on The IBM Rational Robot IBM

One requirement to this system – this is the possibility of its run from the command line, which correspond to products of IBM Rational. At Gary Kelly you will find additional information. To start testing systems IBM Rational, we will use bat-files, which will return the result – the test is executed successfully or not. The structure of the bat-file is the following: Run the test system. Find an error sign in the results of the tests. Return search results. Return the result will be a function exit with parameters 0, if all normally, or -1 if an error is found. The pictures below (see Figure 5 and Figure 6) shows an embodiment of unfulfilled and tests. Figure 5.

Test is performed Figure 6. The test is not satisfied then we consider the examples of external test systems to test the project Microsoft Visual Studio. Using IBM Rational Robot IBM Rational Robot – a powerful tool for functional testing, which has the following features: Record test scripts based on the interaction Users with a test software using the graphical operating system. IBM Rational Robot allows you to record tests on the basis of the GUI operating system and convert the test scripts in the language SQABasic. Editing the recorded test script with built-in editor.

IBM Rational Robot allows you to modify recorded scripts to extend the functionality of generated tests, ie can be formed to work with files, application protocols, etc. Creation of test points to assess the appropriateness of the script testing. IBM Rational Robot allows you to compare the expected properties, the values of various objects the user interface with the actual properties or values that allow us to determine the correctness of the implementation of the test. Connection pooling data for testing. IBM Rational Robot allows you to connect a set of test data from the application database, text file, etc., which provides better conditions for testing the application. Implementation of the recorded test script. IBM Rational Robot test script executes stored simulating work user in a GUI operating system and generates a detailed report of the test. For our example, we write a small test and will form the check point. To do this: The IBM Rational Robot test scripts recorded call: Figure 7. Writing a new script of Run test to be performed by a user with the application under test: Figure 8. Script Writing In writing test scripts configure a new test the check point at the example (see Figure 9) shows how to add check the selected value in drop-down list. F

ItemTracking

02.01.2018
13:48
Comments Off on ItemTracking

Figure 7. New fields in the form of a working element in the example uses a static set of data for each list. If you plan to use dynamic data to the global list, for example, from external sources, you can write an external application that will receive information and update it with the utility import the global list of command line glimport. Using custom controls do not always use built-in UI elements satisfy the necessary conditions for their use. To extend the capabilities and more flexible data manipulation is recommended to use custom extensions to the interface. Here are some reasons that may encourage the use of custom elements for dynamic lists: Standard Constructors rules do not satisfy the necessary conditions, using very large amounts of data, data from an external source is used, value will be stored in another place, rather than in a standard data repository of work items, preparation of the project to create and edit custom extensions interface is IDE MS Visual Studio 2005 or 2008, and the use of the also allowed the expansion in both versions of MS Visual Studio. For the new user control to create the project as Windows Control Library (see Figure 8).

Figure 8. Creating a new project In addition, a class that is created must implement the interface IWorkItemControl. This interface is defined in the assembly Microsoft.TeamFoundation.WorkItemTracking.Controls.dll, which is usually located in the directory : Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssemblies. Also need access to the assembly Microsoft.TeamFoundation.WorkItemTracking.Client.dll, which is a description of the main classes, needed to work with a work item.

Installation

29.06.2014
05:18
Comments Off on Installation

5. Select the compression level. Than the higher compression, the smaller your image, however, boleshe image compression will lead to long-term recording. You can protect the images with a password. Be sure to remember your password if you forget it, you will not be able to recover at any time, and you can not get access to the images without a password. 6.

Look at the information on the last screen refinements before clicking on 'Continue'. When you click on 'Continue' begins the process of recording an image. If the image is saved Acronis on your hard drive, you can continue to operate while in the process of recording. If you run Acronis from a bootable CD or DVD, wait until you see that the image is complete. Cloning a hard drive or restore an image 1. Start the installation of Acronis or from your hard disk or a bootable CD.

If you intend to restore the boot partition, you can only run from a bootable CD. Select 'Restore image', with a computer or hard disk. Follow the instructions on the screen. 2. Select the image you want restored. Make sure the partition or partitions you want to restore the disk match the size and date of image creation that which you need. When restoring from a CD or DVD, make sure that each disk in your archive is available. 3. Decide whether you want to check out the image you're recovering. A scan can take quite a long time, so maybe you do not even want to check, even if you have something to lose.

Photoshop Pattern

30.09.2013
11:38
Comments Off on Photoshop Pattern

When handling photographs often use textures. They give the image of artistic, photo fix minor flaws, is used for background in still life. I think that many faced the problem of how to download textures downloaded from the Internet in the format jpg, that can then be used as patterns. I almost always use when editing photos tab Pattern Overlay, which I have in store interesting patterns in addition to standard fotoshopovskih. 1. Decide what textures will be loaded into Photoshop. To do this, place them in a separate folder to avoid confusion.

For example, a folder with the textures of metal called a metal. 2.Otkryt first image from that folder in Photoshop. File Open. 3. Choose a contribution (top) Window>> Actions 4.

Click on the triangle in the upper right corner (triangle acute angle down) 5. In the drop-down tab, click New Action. Window will appear, which will be allocated to Name. You can call the action pattern or just a pat. Hit Record (Record) button at the top turns red, there is a record. 6. We write our actions. Click Edit>> Define Pattern. (Turning to the pattern). Climbs out the window Pattern Name. (You can enter the title). Click OK. 7. Now click on the box to the left of the red button, the record stopped. 8 .. turns all the textures in the patterns (patterns). Single action. Click File>> Automate>> Batch. From the drop down menu 'Action', select the name of his action (pattern). It may already be selected automatically. Click on Choose from the menu and find your folder with the textures (metal). Ok. 9.Teper can see that all the textures in the folder open at a time is recorded and we act: each texture is stored as a pattern. 10. Keeping everything as a set (. Pat file). Go to Edit>> Present Manager, to choose the texture you want to leave the set. The drop-down menu, select Patterns. Use the mouse to point out the texture-pattern'y that you need to set, to select multiple textures at once, hold down the Shift, clicking on him. When all you want, click tecture, click 'Save set', and name as a new set of patterns, your (. Pat metal). Everything! Now you can open the image and give it a unique look with the patterns! Layer-new layer fill-select pattern! Good luck!

Trade Management

14.10.2011
03:12
Comments Off on Trade Management

The project was required to unite in a system based on the '1 C: Enterprise 8 '7 operation, retail and back office. The objectives of the project specialists 'BIT' together with the customer identified: obtaining more productive system, ready to scale with the expansion of chain stores and allows to solve the problems in the future automation of budgeting; reduction cost to broadcast data and analysis of data from different databases, accounting for several entities in one database; connection to a single information system of commercial equipment in the stores and warehouse; reducing costs in the area of sales accounting fees; reducing the cost of maintaining the regulated accounting. To achieve the objectives in the back office has been selected product '1 C: Operations Management Enterprise 8 ', because it allows you to create a common information space for all business units and has the necessary functionality for the further implementation of the budgeting system. For automation of retail outlets were chosen solution '1 C: Trade Management 8 '. In addition, the company 'ICE' was supplied the necessary Equipment: bar code scanners and label printers for retail stores.

All work is completed within 3 months, the system covered 37 jobs in seven stores. Have been automated following areas: Managing procurement; Inventory; Wholesale sales; Retail sales; Commission trade; Inter-company sales of; Regulated Accounting. Running an information system was implemented simultaneously in the central office and in the shops. All the shops are run remotely, previously there had installed the software and commercial equipment.

Trade Beat Increases Employee Qualification

07.09.2011
19:28
Comments Off on Trade Beat Increases Employee Qualification

Trainees became chief accountant offices Rossotrudnichestvo from Austria, Bulgaria, China, Colombia, Egypt, India, Mongolia, Poland, Serbia, Tunisia, Ukraine, Finland and the Czech Republic, as well as staff Zagranapparata in Moscow. The federal agency has Rossotrudnichestvo public services and manages public property in the area of international relations and Russian Federation with the CIS and other foreign countries. Rossotrudnichestvo shall function through offices in over 70 countries worldwide. Partner in organizing the training was the company “1C: Accounting and Trade ‘(ICE), which experts have years of experience successfully implementing and supporting software products developed specifically for the accounting, operational and managerial accounting budgetary institutions. The high level of professionalism BIT confirms the status of “competence center on fiscal accounting.” BIT company offers a wide range of customized solutions for accounting Low cost health organizations, education, culture, social development, social protection, physical culture and sports, trust funds, tax services, customs, power structures, etc. BIT specialists offer a full range of services for federal and regional public institutions, from advice on choosing a software product before operational implementation of a comprehensive and professional support. Company “1C: Accounting and Trade” (ICE), the official partner of the firm “1C” in 1997, is now the largest network of franchise companies “1C”.

The company has 50 offices BIT, which operate in three countries: Russia, Ukraine and Kazakhstan. Specificity of the ICE is not only the automation of the enterprises on the basis of “1C: Enterprise”, but also training, counseling clients on the full range of professional issues. During operation, the company produced over 80,000 successful installations of automated systems. In the state of more than 2,000 employees, most of which was certified by “1C”. Quality Management System “1C: Accounting and Trade” (ICE) in five offices in Moscow, including in the Central, in three offices in St.

Powered by WordPress and Artsavius Theme