Archive for June, 2017

Installing Windows

13.06.2017
04:56
Comments Off on Installing Windows

Violation of conditions delivery. Transporting plastic window – an important point. Improper transportation of a window can lead to deflection and deformation of the glass, scratches and contamination. In the worst case scenario windows may be broken. Each respecting the construction company should have in its fleet at least a few cars, specially equipped with racks for transportation of plastic windows. This design of the car body eliminates the possibility of damage to the window.

However, it is not a guarantee that your window will bring you in good condition. Once the box was brought to the door of your house, check it again. Are there any dirt and mechanical damage to insulating glass (scratches, cracks, bubbles, etc.), there is a protective wrapping on the window unit. Check that the markings on the plastic profile manufacturer to whom you chose when ordering window. Also check out having all the necessary accessories and components. 4. Violation of technology installation window. Violation of technology installed window assembly can cause many problems.

What are the major errors in installation of windows can be admitted and what consequences they lead? – Installing a window unit is not level and not perfectly vertical results in damage to furniture, to gapping and the anointing of the valves, and eventually to the flow of water into the building. – Loose sealing joints leads to gaps between the frame and the wall, which necessarily entails the issue of drafts and the freezing slopes. – Insufficient number of points of fasteners, fixing leaky windows leads sag deflection to the valves and boxes of window unit. On the contrary, is too dense mounting frame when the windows were “tightened” leads them in loose closing. To solve these problems is not always possible and in some cases require not only reinstalling, but replacing the window. Yet another complication is that the errors appear not mounting after installing windows, and some time after his operation. In this case, construction company is obliged to send you a technician to troubleshoot the problem. And every respectable company must initially give you a guarantee on the windows. If not, then you have come to unfair suppliers. – Pre-check the reliability of the company! 5. Violation of requirements for operation of the window. Improper use of the windows very often leads to breakage of fittings, seals wear. To avoid these problems in advance learn from experts to maintaining plastic windows. Well, first of all you need to remove the backing from the plastic profile and remove the debris. If the window is dirty, you can wash it with soap solution or detergent containing no solvents. Fittings and seals also require that care: the details of fittings must be lubricated with lubricating oil, and seals – silicone oil. From time to time is necessary to regulate all window mechanisms. And usually these are handled by experts of the construction company that provides routine inspection windows. And one more important advice: plastic “afraid” high temperatures and mechanical damage, so take care of the plastic profile from the effects of hot objects, from bumps and scratches. We introduced you to possible problems that may arise after the installation plastic windows. Sound approach to the selection of the organization, the correct selection of windows and cared for him – a guarantee of your good mood and comfort in your own apartment!