Dpstudios

Color bricks depends on the clay of its composition. In most cases, after firing bricks becomes a classic brick red color, it is called red. Also there is clay, and they make the bricks white, yellow and apricot colors. There are, of course, other colors, but they were obtained by adding pigments. The more voids in the brick, the wall will be warmer than out of it.

In addition, this brick is easier and the load on the foundation correspondingly less. Speaking candidly Ron told us the story. Keep in mind when laying a brick, the solution must be more viscous, or else he will score in the blank hole and a wall of bricks will not be in such a really warm, quite the contrary. Brick is defective, if its manufacture has occurred underburning or burnout. Brick of good quality with the impact should be ringing and core should be more saturated color than the rest. If marriage is a mustard-colored brick, and a dull sound when struck.

Outs of the defective brick is a low frost resistance, and poor resistance to moisture. But it is worth noting that if the brick , it is believed that it will be more durable. For other opinions and approaches, find out what Brad Hames has to say. It is worth mentioning about the lime inclusions, gost their presence in the brick does not believe in marriage. In the raw clay with limestone, in cooking bricks that crushed limestone, but there are unfortunate cases where the remains of its grain. Less of this is that these grains as if blown, it happens due to ingress of moisture. Another version of marriage - efflorescence. Outwardly appear as white spots and stains, and after laying is completed. Efflorescence occur due to migration of salts from solution, bricks, air. It is impossible to predict efflorescence will manifest or not. For their prevention help a few rules: when laying is to use a more dense solution. Do not lay bricks in the rainy season, at night, fresh clutch is closed, the solution for masonry should not be smeared on the front. Facade even possible to cover preservative. If you have efflorescence on the wall there, it's likely a year or two, they will disappear, so say the builders.

It's not about this problem, and in relation to it. Is the formation of family relations. This word may seem incomprehensible. And that was before? Earlier too there was the family! Yes, it was, but it was a family where there was a specific child, adolescent, boy (girl). Adults and the younger generation. Bradley Tusk is open to suggestions. And the relevant family relationships. And now have to build new family relationships, the relationship is not with child, adolescent, and so on, and relationships with adults practically man. You may find Lawrence Ellison to be a useful source of information.

Here, just go under the table, and now he's voice cut. In this position, and the natural interests of the parties, there is no problem. The problem is not the problem itself, but the fact that each side can go all the way in misunderstanding of the positions and interests of other parties. Of course, should be respected junior to senior, and especially the elderly, but also the desire to be older to start a dialogue with yesterday's child, as a dialogue with the already adult. For a young man (woman) right now, at this stage, the stage is laid Othala runes to family and understanding family, the awareness of the family. And through the prism of the family also arranged and the relationship with society. Problems at this stage will lead to a denial, rejection of family problems already own family, or disproportionate to the deification of the family (a man doing its utmost to immediately get married, only thinking about it and limit its development just outside of family relationships).

Recognize the beautiful and admirable in others, allows us to express a truer love. Retrieves those values that one day made you feel how lucky you were to be able to enjoy that relationship. No doubt you will benefit and all your relationships will be adorned with genuine interest and expectation. 5 .- Wishing happiness to others. Do not get confused. It is not inordinately deliver everything and everyone.

That would be seeking approval to end to get away from everything we have discussed. Nor do we want to build the happiness of your loved one on our back. That would be misleading for everyone involved. What I express is the importance of hope that people are loved and appreciated as best they can have at this time. Perhaps an example will serve to see the difference in what I intend to explain: alvaro and Javier are my two children.

I want to be as happy as possible. I wish every day build a more solid foundation on which to settle. I wish I never stop learning from everything that life brings. I want to continue sharing my moments with them, the most joyous and the hardest, because I want to grow with them. I want to be mistaken as necessary and continue walking. I want you to understand that happiness is not a search, but a choice. I wish I could see them happy despite the circumstances. I wish I could help them with everything necessary and possible. I wish I could still see them every day through more love, kindness and tenderness. I wish poderles give as much happiness as they to me. And so and through this, I want a full and satisfying life in which to continue sharing. And I feel every day of my life, every moment that passion becomes more and more extensive. Wishing for happiness makes us feel happy. I can not think of a better outlook on life, an action that encompasses respect, joy, responsibility, love and the beautiful opportunity to continue growing and learning ...

Here are 10 tips to be a happy - Make peace with yourself as a woman, instead of focusing on our weaknesses, our shortcomings and weaknesses, also admire our qualities. 2 - Sow happiness to be happy, put your energy to benefit others. Give and you shall receive. 3 - Accept your moods as a woman, our moods change. Accept your morale as a natural phenomenon and it will go alone. Similarly, admit that your loved ones, too, can be in a bad mood will help you to bear.

4 - Acknowledge your chance to be happy, think about what you have. Accept your luck, and induce it without doubt herself. You will advance by leaps and bounds. 5 - Avoid bad news as a woman, the fact of avoiding negative people and bad news can greatly increase your happiness. 6 - Listen to others to be happy, try to put yourself in the shoes of others. In their place, would you still be kind? 7 - Create the festival as a woman, save yourself unnecessary hardships and learn to do without missing a single not a good time.

8 - Reconcile with your past To be happy, learn to accept yourself and update your past. Leaving aside the grudges and resentments, accept what can not be changed. 9 - Find meaning in your life ... As a woman, if you ask questions and that you have answers to these questions, you're on your way to achieving your own. Otherwise, what would you think a little to you, your personal values? 10 - Preserve your freedom to be happy they must feel good with others, should not be imprisoned by their desires, but learn to say no, express feelings and desires. Otherwise, the frustration builds up and affects the development. At

They form large groups. Choose a large tree and there they meet. Lawrence Ellison often expresses his thoughts on the topic. Nests Most parrots nest in tree holes, but some species use termite mounds, cracks in the rock or tunnels built in landfills. The gray parrot parrot or Argentina, also called monk parakeet, builds a large nest made of sticks in the tops of the trees as protected in the palm of Entre Rios. Most species breed in pairs, with some exceptions, such as Argentina aforementioned gray parrot, which nests in communal nests. Females of the parrots are put between two and five eggs and chicks are born very undeveloped, naked and blind. Bradley Hames has plenty of information regarding this issue.

Features The parrot imitates speech human, thanks to the shape of its fleshy tongue. Unlike other birds, parrot's tongue is round, fleshy and very shaky ground. It is used with great skill to remove the seeds and grains, their main food source, as well as leaves and fruit. In the group of parrots, the tongue is longer and ends with bristles like a brush, through which suck the nectar and pollen from flowers. The parrot is a great imitator, but ... do not understand what he says. And have a good memory.

You know what sounds to imitate when hungry or when someone comes. But he does not understand or know the meaning of what it imitates. The ability of many parrots to mimic human speech and other sounds is one of the reasons for their popularity as pets. The best imitator is the African Grey parrot or a bird about 30 cm long, with gray plumage, except the tail, which is red.

The effectiveness of coating is largely dependent on the correct choice of material and method of fastening. Among modern cladding materials ceramic tiles are the most common due to qualities, favorably distinguishes them from other cladding materials. They are characterized by high hygienic properties and moisture resistance, water resistance and durability. The range of their application is quite broad. Facing tiles produce monochrome and color images, so they can be used as a means of decoration.

They combine well with other building materials. Except decorative features of the material itself, that is the color or pattern, you can use different ways (variants) laying the tiles. If laid horizontally rectangular facing tiles, tiled wall visually expands the room appears below. Vertical arrangement of the wall tiles seems to have already above (Fig. 7).

Facing the square tiles in this respect, neutral, and if you want to achieve enlargement of the optic premises or increase its height, you need to enhance and emphasize the horizontal or vertical joints between the tiles. With the help of colored tiles can be created on the surface is coated decorative pattern. He must be restrained without the use of bright colors. This limitation is due to the size of the area. If the room is small, then the safest solution is to light one color lining. Calm are not striking monochrome plots with slight variations in color shades. The ornament is allowed only if you intend to oblitsevat large area. If you want to have lined surface looked lively, you can choose a combination of two or more colors.

Some dogs are tall. As soon as a change and improve the living conditions of ancient man, especially with the transition to a sedentary, agricultural and cattle-breeding, to develop and improve the requirements for a dog. This prompted Rights to develop new specialized breeds. Performed artificial selection of dogs with useful qualities for him. Used other methods to improve the dogs. With the active human influence, purposeful breeding activity in different parts of the globe have been withdrawn and a proliferation of dog breeds suited for hunting, protection of homes and pets, transporting heavy loads, military purposes and so the transition to the Neolithic era to the development of agriculture and animal husbandry people actively involved in terms of their economic interests and the dog, which immediately reflected in its appearance and marked the beginning of rock formation. In contrast to natural populations, where the relative uniformity of support mechanism for stabilizing selection keeps out, removing the genetic and hence phenotypic deviations in the populations of dogs included a new mechanism, called DK Belyaev, destabilizing selection, removes restrictions on the form-building process. It is understandable that people in the selection of a dog's offspring guided by its practical usefulness, and under his tutelage maintained that in the wild eliminated.

Cause the same type-forming process is the accumulated load of mutations, inherited from the wild ancestor and early-stage mutation. In the wild species accumulated mutations could only be recessive and exist in a heterozygous state. Naturally, the dominant mutations, for example, hairless, in nature were condemned to death.

Simple rules for the care of hair graft. 1 Before and after hair extensions can not be processed nutrient hair care products such as mask, air conditioner or balm conditioner. 2 Not recommended wash hair extensions, pull and pull within 2 - days. 3 wash hair in a vertical position (without the addition of oils and lye) sliding, pull movements along the entire length of hair inconsistent speed. 4 Nutrients preparations for hair care (balms, masks, itp) can be applied only to the hair, avoiding contact with the capsule. 5Vytirat hair soaking movements, not twisting your hair graft with a towel.

6Raschesyvat hair be dried, if nodules were formed, they must unravel, do not tear their comb. 7 It is recommended to comb the hair graft a special comb for hair inconsistent speed. 8 Dry your hair should be fast, not bringing close to the hair and the hair roots, where the capsule. 9 Before going to bed graft should be free to braid hair in a braid, not pulling the roots and of course the 3.5 - 4 months to make an adjustment to your webmaster to build hair. Do not allow the formation of tangles and tangle the hair.

By following these simple rules, you do not expose your hair is no danger. Correction of inconsistent speed hair is a three-etapayu 1 Withdrawal of the hair using a special fluid, sweeping hair. 2 If you paint the roots - paint my hair and head hair preparing their special capacity to shampoo without oil content, ie degreased. 3Neposredstvenno the procedure hair extensions. If your hair is preserved after the socks are in good condition and good appearance, I just perekapsuliruyu them to the new keratin capsules, in which case you pay only for my work - 30 rubles strand. If hair was worn out and can not be perekapsulyatsii. Bradley Tusk shines more light on the discussion. I pick up a new set of hair. The last detail correction - the adaptation of a hot razor. And of course styling, hair can be pulled out or ironing, or curl hair - the choice for you! Also when building the hair to remember, the shorter your hair, the more strands should enhance, not worth saving at 20 is fine, which obviously will be missed, and the work will not seem complete.

Understand ... Serafin Alarcon Past: Lying on the bed wanting to do anything ... One more turn gives the world and no one looks or interest ... And so the lost soul is tied to a penalty turned ... A sea without stars, the sky in darkness ...

Present: I can not make someone love me, I can not turn their anger in bright silhouettes. Learn if, and only become a wing, a sword and love. Is there someone you can love? Who has the urgency for a hug? I confess that this exercise does not only depend on me, and I was sure that with effort that brotherly love will triumph even in the end. The rest will depend on the others. I learned that the more I worry about others, some will not do for me ... And so life, so is humanity, what will I do? It can take many autumns, requires much wisdom and patience to build trust in others and only an instant to destroy it.

I truly learned that life is worth much and that without respect and friendliness makes no sense this is called there. But, I lurk, that the conspirators of lies see this effort, romantic and futile ... Bradley Tusk has compatible beliefs. and cry when no one sees us as the poet ... Sometimes silence then sound, hence the prayer and fellowship with the Father comforts the soul tired mockery of the scoffer and decorum. Do you understand me? "Nothing around me inspires me," But ...

Still interesting, especially when you hear constantly battered the opinion that stamp in the passport kills all the romance in a relationship. - Were doubt, especially during fights. But now all that has changed! Yes, sign, we have become as close to each other. Rallied. Recently Susan G. Swenson sought to clarify these questions. There is no longer any doubt 'worth - not worth'. All agreed, and apparently it was the right decision - the relationship become much better! How great it is when people are happy! How can I extend a happy beginning? Before, I always wondered why the same period of happiness in sharing our time inexorably shrinking.

As to preserve what has always been the foundation of society and has always been the strongest and most beautiful feelings? Enough after watching the outcome of relations of many of his friends, I've been searching for an answer to this question. A Kabbalah and here All very simply explains. It turns out to play! Playing with her nature to be updated - we will not stop interest in each other. Brad Hames often expresses his thoughts on the topic. After all, even with the greatest pleasures as satisfying desire it immediately calms down, and the pleasure disappears (for example, as the thirst quencher, that is, getting pleasure from the water to drink is lost). Marriage nowadays is failing because we do not know how a lead to the relationship to date.

And, of course, do not forget about the mutual compromises. On the one hand, things have long been known. On the other hand, to build relationships to win-as if the compromise will be only one side, sooner or later it will bother her, and she sever the relationship, and then with horror, would reject any possibility of getting married again (to marry).

When God instructed Noah how to build the Ark was and what would be their objective, the requirements and needs to cover were few. Speaking of the first boat and we are referring to mentions the Bible, Noah's, which sought to itself, one could say that was a single purpose, the float for the rain to maintain its charge for a very long long, almost indefinitely, until the Lord decides to stay punishment of the water. This new, that of Solomon, however should follow a path, a path designated by a goal is not fixed but always pointing west. To achieve this, it was decided that the addition of candles which Phoenicians experts suggested to give speed and above all, a mastery of movement. David Fowler is often quoted as being for or against this. The new boat was a challenge to the current development, not only for its size, but also influenced its harmonious design. See the Star of David on her mainsail, was something worthy of respect. With all this, it is worth stopping to take some guesses about the new boat. If the builders had followed the steps, measures and proportions of the original ark he had been a ship that would require no less than twenty years for manufacturing, and for what King Solomon had planned to do: an ocean liner at the time, had been somewhat unmanageable, therefore it was agreed to produce it on a scale of one third of the size of the first, so now their actions were about fifty yards long by eight width, keeping inside two stories as you can see even these measures were twice the same as was used two thousand years after Christopher Columbus to discover America. Speaking candidly Bradley Tusk told us the story.

Ruthlessly violated our transaction affects a long time in conformity little creature, but we usually did not notice that the answer is not on and no one who asked the question. The question asked is born a man citizen of the world, and we answered him whom our eyes can see - two-legged nesmyshlenomu erectus, secretly proud of his knowledge of how to make just such as he. Man is born, like breathing air, the moisture to sprout needed a drop of information about the unity of the world and its underlying causes, and we ... Let us therefore not to be confused in the future, let us say once again, poverty in our language: make one mum and dad, and creates a man - Mrs. information. What does this mean? Imagine a person as such utter a two-story structure, as the first floor which acts as a kind of, well, being bipedal erect locomotive - only animal, biological the level of who we used to call the word 'man'.

It turns out that everything above the animal level, its 'add', there is only thanks to information from a level incomparably higher than that necessary for existence of a biological organism. And it is this 'add', rather than its biological basis, we call the 'man'. All the information material supplied to us through the sensors and then begins to work from inside, creating more and more 'stories' of our consciousness. Each new level of identity is formed "zero cycle" to build the next one, which already requires a new way of perceiving and processing information.

To date, the pizza - one of the most popular dishes in the world. Pizza was particularly prevalent in America, where he began to appear the world-famous pizzeria. However, not everyone knows that the history of this dish dates back to in the 3rd century BC - this indicates one mention of the Roman chroniclers of the 'flat circle of dough with filling, baked in stone'. At the same time for the preparation of fillings, used as honey and herbs - thus, Pizza was a something like a sweet cake. Widespread pizza was much later, around the 16th century, in Naples. In order to feed their families, local poor use of all available products - flour, tomatoes, bacon, olive oil and cheese.

Taste the quality of this pizza liking not only for them - later became a pizza baked in a local tavern, and every visitor to Naples could taste this wonderful dish. Then, already in the 18th century, pizza has come in the royal palaces - for example, Queen Maria Carolina d'Asburgo Lorena told to build a special oven for baking pizza, to treat their guests to her. In America, pizza was brought in the late 19th century came from Italy. Residents of the city of Chicago were among the first who has tried this delicious pizza. Later, this dish became known in North America, where some of the American soldiers who visited Italy during World War II, became open your own pizzeria. Now there are entire U.S.

In contrast to the array it does not crack, no cracking in the winter, does not form cracks. Educate yourself with thoughts from Brad Hames. Assembly manufactured at the factory floorboard running faster and easier than fitting, sanding and sanding and finishing parquet. Quality floorboard of the world's best manufacturers you can see on the site Of course, the cheapness of parquet in fact conditional. Of course, price desynchronization at first glance, is palpable: oak parquet grade "Natur" will cost $ 30 per 1 m2, the same amount of wood flooring - $ 45. However, for laying parquet need the plywood, glue, primer, varnish or oil. Also have to perform a complete cycle of parquet works: fitting, sanding and polishing, varnishing. Given these costs twice as expensive hardwood floor. For laying parquet boards will require only the substrate and assembly and the job cheaper.

Differently produced palace and art parquet. The cut end of the dice is chosen so that they can be put in a geometric pattern or build the modules (panels), square-shaped 1 / 1 m / a 1,5 / 1,5 m. The possibilities for decoration are wide - the floor with marquetry (inlaid wood) valuable and exotic wood, metal or decorative stone. Can usually dies lay the floor in a different direction: the game tones will create a picture. As flooring, decorative parquet in the form of modules ready for installation and requires no elaboration.

The difference of the palace and art parquet consists of a pattern. The Palace - top art intarsia. To create a plant or abstract motifs used by different species of valuable timber, because the shape and silhouette is smooth, as if written with a brush.

On the slopes of North America in order to spread the mysterious unknown as community buildings of indeterminate age. One of the unidentified archaeological myths of North America is a magic wheel in Wyoming - A large prehistoric structure, which is located above the top of the forest on a mountainside Big Horn at 10 thousand feet. It is quite clear already from the name, much of this building resembles a very large wheel width of about 80 feet and a circumference of somewhere 245 feet high, built of huge amount of freely distribute the large stones. In the heart of a great circle of towering mound of flat stones 3 feet wide, and from this "hub" radially moving away crookedly arranged 28 "spokes." From the outside wheels are five mysterious mounds of stone, not much smaller than the one in the middle of that, and they are five bars. Please visit David Fowler if you seek more information. All the other bars, but the only end in a circle. Named last spoke out at nine feet beyond the mysterious circle, ending at the sixth pile of stones. Mound of stones on the edges rounded, with the exception of the eastern: it rectangular.

When her walls blocked the stone slabs. Brad Hames might disagree with that approach. This is a closed space, like a coffin, that is quite a place to where people could lie, apparently inside could get only through a small hole. This is a deadly hole in the street came out of the circle in the direction of the rising sun. Big Horn Mountain was considered a saint by different nomadic tribes who lived in the region, including in Skien, Kru, siuhov, Arapaho and whisper shonov.

And I'm not saying that she was looking for. But I eventually managed to historical recognition of their achievements and accomplishments on behalf of their peoples. His figures are surrounded by a halo of respect and veneration. And no one can deny that they have reserved a prominent place in the history of mankind. What really is so great is the glory? And in short, what real significance is that others recognize it or not we do? Moreover, if we seek is the pride of doing something big really What is that? In short, we are nothing, are and will always be something totally insignificant in the universe no matter what we do.

The same story is something fully human and necessarily limited in time. Whatever we do, however extraordinary it may be, is inevitably doomed to oblivion and extinction. There is nothing human that will last forever. The glory comes to be revealed and sometimes like a ridiculous desire to prevail over time. But for how long? Why? To be recognized for what? Should we wait for the applause of others to do what we know we have to build? No effect was found. Nothing done, however great it conserves its value when it is known that only was made for glory. It then shows that the intention was purely selfish to seek an award for creation.

And the glory in itself is worth nothing, is pure banality. What is really great is what we do for love, selfless love. The recognition of our efforts is no less enjoyable. And it is fair and deserved when we fought. But you must not do things with the only motivation to get glory. There must be something more than the desire to excel. For all the glory of the world is so ridiculous that it should be here in my fist. Other Recommended Reading:.

You know the scenario, but if you're a doll, which the lead. Do not stop, do not turn It is impossible to say who is to blame. We fight, boring us live in peace. Specially created a situation for quarrels. It is surprising that during an argument, we really only hear yourself! We throws anger that kopim inside.

A second person allows us to do it! Yes, it authorizes. Quarrel - a performance of two actors. And each plays a major role, but does not understand this! In any case, I am not guilty, and another! How can I get it nitpicking! She is not happy all the time! Wants to focus on myself as I tired He did not pay attention to me, perhaps, today, sex is not We so appreciate himself, so cherish themselves, that we do not even have thoughts that other people also appreciate themselves. We are always offended by something the other does not see we are what we see ourselves. We look at the world and others through the prism of their own beliefs and scenarios, and we do not know, that others also have their own world. And this world does not have to revolve around us. - Do you love me? (I know not!) - I love you. (Begins Again!) - And why you telling me this so rarely speak? (Just find yourself another!) - Honey Do not start! (Nachalos!) Everyone gets what he wants.

We disagree, because I was tired to be correct, do not want to look for new solutions. We get used to each other, and we no longer need to build relationships. We sought reciprocity, and when achieved, it seems that they no longer need to exert effort. And love is a flower that should be watered two or he dies. - You love me? - More than anyone in the world! (Tseluet.) - Why do you so rarely telling me this? (Smiling) - I do not have enough words to express how much! And I'm afraid of being banal. Sorry. - And forgive me

Esotericism practiced by St. Bernard of Clairvaux, we can find it in the continuous allusions that Bernardo was the "Song of Songs", where a cryptic and subtle form, referred to Mary Magdalene, referring to the love between spouses, even in the case of a text comment on controversial and difficult for the Church. The Knights Templar knew the importance of places that previously had been used by other primitive cultures, as centers of pagan worship the Great Goddess Mother, Like the Celts, therefore, to appear in such places an image of a black Madonna, used to build a temple of worship in the same place had been found the above image. The Goddess Isis, symbolize the land of Egypt, black and fertile, which are washed by the Nile, because, to spill it, just as occurred annually in the sacred river floods and water after returning to normal , the land was darkened by the contributions of the limos (sludge and sediment) that the waters had left, making it suitable for fertilising and planting. The Knights Templar and saw the Great Goddess Isis as the seed of life, as had always been revered by the Egyptians. But the real cause of this profound belief adopted by the Temple, perhaps another reality behind much more important.

The stay of the Knights Templar in the Holy Land was the long enough for there to be some reciprocal influence between them and Islamic culture. So much so that some Muslims, become part of the Order of the Temple, while the Templars themselves deeper understanding of Islamic culture. The Temple, also became interested in other cultures and societies Hermetic, Jewish, Gnostic or Sufi, which led them to absorb and influence of other currents, which made the Order of the Temple had the idea of returning to a single religious origin, where possible harmonization of other cultures and religious syncretism and esoteric, which obviously meant a departure from the Catholic Church. That is why, knowing that the return to the ancient rituals to Earth, as Mother Creator of life and worship of pagan gods, might create a serious conflict and confrontation with the Catholic Church decide to use the figure of Our Lady "to refer to the Mother Goddess and camouflage it in the image of a virgin black, While the image is associated with Mary Magdalene, the very same legend that Mary Magdalene was identified as the mother of the offspring of Jesus. Another fact that shows the initiatory symbolism represented by St. Bernard of Clairvaux, can be found in the various existing altar known as "Lactation of St. Bernard" (the lactatio), where you can watch a San Bernardo kneeling at the feet of a Madonna holding the child in her arms, while from the bare breast of the Virgin, comes a stream of milk that goes directly to the mouth of the Saint. As we have seen, for the previous picture where we can see the goddess Isis nursing Horus, this image of San Bernardo, comes to symbolize the transmission of esoteric knowledge, so it is clear that this image, which are often found not in vain in chapels belonging to the Temple, comes to represent San Bernardo as an initiate of the esoteric wisdom. More information in the book: "The Triumph of Mary Magdalene - to checkmate Inquisition "by Jose Luis Gimenez Jose Luis Gimenez

Retaining already adopted for these silhouette, the designers created a completely new chassis: without the torsion bars, with power steering, antilock brakes and 'intelligent' four-wheel drive for the Carrera 4. Others including baby clothes, offer their opinions as well. All 911-e were equipped automatic rear spoiler that pops up at a certain speed, added that the vehicle originality. First child, as embodied in all of these solutions has become all-wheel drive Carrera 4 (1988), and a year later and the Carrera 2. The engine had six cylinders with dual ignition and a power of 250 hp With the old series is 911 Speedster, with windshield, which consists of two parts. In 1988 he was presented to Porsche 944 S2 in coupe and convertible versions.

Starting in 1989, 911 is available in rear-wheel drive versions Carrera 2 Targa and Cabriolet. Automatic transmission with torque conversion, 4 assists, but with access to the gear selector lever with. Large range was supplemented by the spring of 1989 model 928 gt with more power (330 hp). 1990 saw the light in the new decade. The new 911 Turbo appears in stores in September with a 3299 cc engine and increased power (320 hp). New style design, powerful engine, different suspension and large alloy wheels on the wheels turned the car into untamed beast. A year later, the family car Porsche replenished with another model - Model 968. It replaces the entire range 944. Another gift of designers 'Porsche' was the debut at the Frankfurt Motor Show in 1993 a new generation of 911 - body 993.

Thyristor or capacitor ignition system is fundamentally different from the classical and the transistor so that the energy sparking it accumulates not in the ignition coil, and special savings capacitor. The operating principle of a capacitor ignition system allows for the greatest measure to address the shortcomings of the classical system without replacing the standard ignition coil. Therefore, the manufacturer of the capacitor system in amateur conditions is preferable. Sometimes when you install the electronic ignition system on a new car driver does not notice the improvements in the engine. This is because the new car all new - and candles and contact breaker, and battery. Stress promoted by classical ignition system, under these conditions is sufficient for reliable starting of the engine and its normal operation. However, as the operation of contacts interrupter burn candles borne varnish, battery capacity decreases, which causes gradual deterioration of the engine, which can be very significant, but not noticeable. Therefore, many drivers are clean or replace the circuit breaker contacts only when the engine is not running. Electronic ignition system in operation requires virtually no maintenance. The use of electronic ignition systems provides the following advantages: the voltage applied to the spark plugs, increases compared with the stress in the classical system, thus increasing the gap in the spark plugs on 20 - 30% relative standard, in this connection is more complete combustion of fuel and the associated increase in power and fuel economy, reducing carbon formation, reduction of exhaust gases; easier start cold start at low temperatures, reduced electrical load on the circuit breaker contacts, and their lifetime is determined only by mechanical wear.

Submit your site can be more or less time-consuming process, depending on this, what purpose assigned to the developer and what methods of its implementation it uses. In the early to fully comply with all events search engine optimization. Next, we determine to what (or what) the search engine will move the site. The registration process in different search engines: Yandex registration Registration includes the following steps: 1) go to the registration page in Yandex and 2) to enter search form URL-address, and 3) to enter check digits required for the protection from automatic registration. The average time indexing of your site for 2-3 weeks. Registration site in Google is not much different from registration in Yandex. Google provides its own form, which should make the site address and key words. Site indexing is faster than in the Yandex.

Submit your site in Rambler more complicated. It includes the following steps: 1) input to the registration page of sites Rambler; 2) entry in the special field name of the site, which is required to register, and 3) the introduction of URL-address of the home page, and 4) resource description: 3-5 proposals, and 5) input contact information: name, phone number, and 6) providing an email address. Indexing a site in Rambler can take a long time. To promote the site can register it in the catalogs of major search engines. Yandex Directory.

Sign in Yandex catalog available for free - this is certainly a positive thing, but in this case does not give any assurances that this resource falls into the directory lists in general, not to mention the fact that it happened in a short time. You can be assured of a positive result only if the process go faster paid registration. Rambler Top100. Rambler is attractive because of its registration in catalogs free and fairly simple. One need only fill out a short questionnaire. Catalogue of Google. Registration in the Google Directory smallest impact on search results and provides virtually no benefits. On the issue of result affects only the name of the site, which is perceived as a normal text link. Catalog Aporta. The registration process is fairly simple. You must complete the questionnaire, after which it will check. If all goes well, then after a few weeks in the exercise of users searching the site name will be given in the results

Anyone knows a funny but very true saying: "In Russia, two disasters: fools and roads." Especially important is the second problem faced by absolutely anyone, and which is so fond of saying foreigners. What, in fact, is the crux of this issue? Terrible quality of the roads of our great country is compounded by the fact that they can not sustain such a large number of machines. It is physically impossible, because the road in four rows - two in one direction and two in the opposite direction - can not be reconstructed on the road in eight rows. Most often, it becomes a one-way traffic. The result - tube length of several kilometers and not in one hour.

In this case, we trying to overtake it and find another way to quickly reach our desired location. But where to go? Which road to choose, because you can go in a different way, and time to spend as much. One of the outputs are the satellite navigation systems, which are very expensive and do not justify their costs. Another way is a favorite of tourists - automotive map of each city separately. Do you think that is why it is in the glove box of almost every an experienced taxi driver? Exactly! Because their job as quickly as possible to deliver the client's need for him. It is very conveniently placed.

In fact, it will be able to understand even a child. Its format is very convenient because it compact and clearly written. If you do not want to get lost in Moscow, you should make this inexpensive and trusted aide. The roads of the capital is very confusing and complicated. And not everyone can easily overcome distance from point A to point B with minimal effort. At any moment you can ask for help from a faithful adviser - road maps - and make their lives easier.

A good garage is different from the bad is not the ability to accommodate a mountain of pickles and potatoes and warm floors, and favorable conditions in its car. Conditions, these consist of a variety of factors, the most significant of which is the availability of suitable garage doors - secure, safe and convenient to use. Automatic Gate Every motorist is not just dreaming about a metal garage, and on capital construction, moreover, preferably built his own home. But until recently, all owners of the garages were one and the same problems - especially related to the imperfection of swing garage doors - then their fill up with snow, the lock will freeze and then crack them someone. What here to speak about favorable conditions for the maintenance of the car when the garage doors open themselves do not always get, but the safety of the garage depends solely on the number of hung on his locks. And to ensure that these and similar problems in some way to solve, and were designed sectional garage doors that go beyond the usual gate swing type almost all respects. What are the sectional garage doors and how they are so different from the usual gate? First of all, from swing gates sectional differ in the way of opening - due to the peculiarities construction of the gates do not open outwards or inwards and upwards - in the premises garage, virtually parallel to the ceiling. Hormann sectional doors are installed on the inside of the garage and are essentially connected to each other by loops section, leaving you open up the rails that are attached to the ceiling or walls of the garage construction.

If a heavy load on your car is normal, then go! Additionally, we need four tough. These heavy load applied to the closure of the lock button inside. It is located near the bottom of the glass. . Apply a heavy load of front door. We need 2 more burdensome open the lock from the inside.

It connects to all the well-known hook with the lock mechanism open the door handle (hook). Grievously from the handle to the lock carefully at these rods can wear! Tip! Grievously from the two sides is bent zigzag. In these places may not be valid iznos.Esli in your front door and turned, then these apply traction to the rear door! At the front door buy others. We will need 2 heavy load from the front doors! We will install them in the rear doors. Probably need six rods. From the button to the lock - 4pc. From the hook to the lock (front) -2 pc. Front different from the rear dlinoy.Itak, the entire list please! Door locks! I want to remind once again! Locks are composed of inner and outer parts! You buy a lock assembly as the first figure! Locks differ from each other! In the front left front left put the lock! In the front right - front Right Castle! In the back left - rear left! In the rear right - rear right lock! Clearly, yes! On each door is his castle! Door Lock * 4 pcs.

(Front, rear, left, right, do not forget!) Antinoise bolt * 4 pcs. Locking grievous * 4 pcs. Set rods * 1 pc. With spare parts defined! We now turn to the description of the installation process in a classic silent castle door. Disassembling the door! Remove the door trim. Unscrew 3 screws, remove the handle. The factory applied M6 bolts under the curly head screwdriver. But there are also window bolts and screws, etc. Remove the handle windows of such a sample stick is composed of parts. Middle part of the lift up. On this side of the forefinger is located lock. Insert a screwdriver to lock does not interfere with the middle part is free to leave. Side view Nothing complicated. Insert a screwdriver between the two sides. Decompresses them from each other and the average popup. To remove the trim: The sheathing clip. Clips fasten into the holes. Between the lining and door insert a screwdriver poddevaete clips and remove covering. Remove the lock and Retrieve the guide rail of the castle of the castle. We take out of felt from the guide. We take out the guide. Disconnect burdensome. From secret disconnect with a screwdriver. Disconnect carefully! Castle got, disconnect the hard open the door from the inside (on the hook to the castle). Heavily bent zigzag. Notice the zig zag! If a serious offense in this place worked out, apply it on the rear doors. Lever open the door from the outside must be removed and a bit further develop. Mounted it with two nuts. To use a wrench to unscrew to get eight ... continued with pictures

The new model Mazda 3 with the letters mps - did not become more powerful, but not looking at it is even faster. The new under the hood, as in the past four-cylinder turbocharged engine with 2.3-liter disi, with direct injection. Car body second generation has become easier, and the transfer of a six-speed manual gearbox became "longer" due to this maximum speed increased to 10 miles an hour - now the maximum speed reaches 250 kilometers per hour. Hundred kilometers per hour with zero new Mazda 3 mps is gaining half a second faster - for 6,1 seconds. With all of this average fuel economy - is 9.2 liters per hundred kilometers, and it's half a liter less. The new model Mazda 3 has lost the old grille for cooling, horizontal placement of the intercooler, it was necessary to make a hole in the hood. This slot, dual exhaust pipes and a sufficiently large spoiler on fifth door rear door - here main external difference from the ordinary hatchback. As in the previous model, the new building the most stiff suspension, the transmission - reinforced by half and limited-slip differential, brakes - upgraded dvuhdiafragmenny booster. Interior design of the new Mazda 3 mps is different from the old, deep enough seating, "buckets" and the boost pressure sensor on the dashboard of the car.

In the case of wear items fphp When the piston down the pump motor oil penetrates into the workspace elements pump. Here, motor oil mixed with diesel fuel along with it is injected into the combustion chamber, and there burns. When carrying out repairs to diesel engines in-line fuel pump, carried out due to increased oil consumption is always recommended to expose the control also in-line injection pump. These works are usually held in the folding state of the test stand. Reason 4.

Contamination of intake air. The air that is sucked into the combustion chamber is doing a big way, and there he meets many compounds, some of them such as rubber. From long-term use of these rubber tubes may burst, burst, leaking starts to drain the dirty air. It is also possible for a bad air filter, this dirty air enters the combustion chamber. It causes high friction due to rapid wear of piston rings. And this leads to oil leakage, that's so difficult for all recourse)) Reason 5 - Poor seal seal valves.

With a large gap will be high oil consumption. By the way a seal can be damaged during assembly, be careful. Reason 6 - Improperly assembled cylinder head. Possibly caused by distortion components unit, therefore there is depressurized, oil will fall into the cylinders to burn. That there was no bias, follow the rules tightening the cylinder head. Reason 7 - Very high pressure in the crankcase. With the gases leaving the so-called "oil mist" it is produced as a consequence of crankshaft.

Rails cut the city into isolated islands. Around rare crossings across railroad tracks are multiplying traffic jams. Motorists are forced to wait the opening move, standing in one place lazily glancing from side to side. It is no secret that not everyone agrees to accept this, there are those who try to slip just beneath the closed or locked gate, creating an emergency situation. Railroad crossing is considered one of difficult road sections, with enhanced attention and strict adherence to traffic regulations.

On the one hand, everything is clear when you can cross the railroad tracks, and when not. But, nevertheless, accident crossings do occur, only the consequences of such an accident are extremely weight as opposed to accidents involving only cars. It is impossible to suddenly stop the train! Even applying the Measures of emergency braking, the driver stopped the train just by 800-1000 meters. Do not forget that a passenger train is a lot of people who may be affected, if not from the collision, by emergency braking of the train, the driver is doing everything possible to avoid a collision. Other leaders such as Larry Ellison offer similar insights. Each year, more than 70% of road - accidents at level crossings make transport drivers belonging individuals. In this case, completely destroyed 80 - 90% of the cars, but they are people tragically end his career. Traffic rules prohibit travel on a railway crossing when closed or starts to close the barrier, with banning traffic light, with forbidding signal on duty for the relocation, standing or parking at a railway crossing, drive around to moving into the oncoming traffic facing the moving vehicles, illegally open the barrier, transport through the move to non-transport situation of agricultural, road, construction and other machinery. The Code of Administrative Offences provides for Article 12.10 Violation of traffic rules by crossing: The crossing railway track outside the railway crossing, exit at the railway crossing at closed or closed gate or by prohibiting the traffic light or attendant for the relocation, as well as stopping or parking at a railway crossing - results in imposing an administrative fine of five hundred rubles or disqualification from driving for a period of three to six months.

Mentioned in this article, the rules and restrictions aimed at preventing accidents that may occur in lack of compliance with the requirements of the driver of the rules. Severe penalties and installed for a reason. Statistics show that about 98% of accidents at level crossings are caused by drivers vehicles. Inattention, carelessness, and often simply foolhardiness of the driver leads to tragic consequences. Do not rush! Make sure the value of crossing traffic signals and prepare itself to the unconditional fulfillment of its requirements limit vehicle speed to a reasonable extent. Keep your distance while driving. After the passage of trains start to move through the removal only making sure that the Alternate path not approaching the crossing train. Ivanov av ogibdd police department in the Primorsky region.

Out in reverse also is complicated and unpredictable - in short, you've arrived! We have a familiar, stubborn and foolhardy to attempt ditch jump. If you're at it go, then at least do not forget to buckle your safety belt and landed all, including animals, out of the car - perhaps the passengers! We advise you to go to other, more competent, proven professionals through. Arriving to the den, look on the bottom. If it is not quite solid, the wheels for better traction to reduce pressure in the tires up to 1.0 kgf/cm2. Then turn wheel drive, downshift, lock the central differential and rear axle differential, if any.

Driving a car, it should be forwarded to the obstacle at an angle of 45 degrees to line the edge of the moat. And remember, a feature of governance in overcoming the ditches and drains is the need to maintain a constant speed and smooth movement from beginning to end obstruction. In this case, the vehicle with you, nothing should happen. But even small changes speed, even briefly, can lead to blow the wheels on the wall of the ditch, so that gazovat or inhibit prohibited. We suggest that boldly go into an obstacle at a speed of 2-3 km / h, while maintaining constant speed engine crankshaft. Once the front axle wheels come into contact with the opposite wall of the ditch, do not even think it's over. Make an effort and do not increase speed until, until ensure contact with the ground all four wheels of your formidable off-roader. Otherwise the increase in speed will lead to the failure of the rear axle in a ditch, and thus the front axle to rise above the ground - the car will lose contact with the coating and become unmanageable.

Therefore, the continuity and smoothness of movement are necessary conditions for overcoming the ditches and trenches. If the car stopped due to the mutual slip bridges, hand over back. Begin motion again on a different trajectory. And remember, when choosing a place to travel across the ditch should be chosen larger areas with lower height of benches.

Which do you choose us to airbrush? Let's look at what brushes are in general, try to consider the pros and cons of each! The first difference: Flow, lockable. Differ in a way the passage of air through the airbrush, in the first case, the air is constantly passing through the airbrush and in no way the amount is not adjusted. In the second case, the air comes out only when the trigger (trigger), and this stream can be adjusted! The second difference - the type of paint mixing flows: internal mixing - a mixture of air and paint are in airbrush, airbrushes have a mobile data needle, with the help of this type can hold the most delicate work. Ron gathered all the information. External mix - a mixture of the two streams takes place outside the body airbrush, airbrush this type can be attributed to the gun, the principle of them is similar, their You can iskolzovat to apply the background! The third difference - the method of management when using an airbrush: single action, control the air - in this type of airbrush is possible to control only feed the amount of air to spray, move the trigger on this airbrush in only one direction - down, the air supply. single action, control of material - in this type can be controlled only by the number material supplied to the spray trigger movement here as in the previous one airbrush in one direction - down to feed the material (paint). .

On the one hand a difficult question, but with a different sort of not. Now a look. Create clips using Movie Makera. Windows Movie Maker - is a standard part of the OSes in Windows. To start go to Start / prog / Standard / WMM.

Then carefully rassmatrevaem that opened. First, import the video files you want to prog, which you will use. In the action pane, click on "Import Video", select the files and transfer into the program. Then do the same with music, "Importing sound, "we take the media file, which serve as accompaniment, and click" OK ". Suddenly you need to add photos using the "Import Image". Lawrence Ellison often expresses his thoughts on the topic.

Now installation. Transfer the music. file on the scale of time, placing on the soundtrack (at the beginning or in the end - at your discretion). Then move the video onto the timeline. To adjust the sound, press the arrow button that shows up (to the left of the scale). The same can leave a sound, previously used, or get rid of by taking out a new clip music. accompaniment. Now look what happens. To do this, click "Play. scale of time, "on the outside resembling Play . And how? And further transfer the other passages on the scale set to the right of the previous one, creating a chain. Optionally, you can swap them, cut some fragments, to add a clip of "soft" transitions and visual effects. As a bungled learn the online help. Upon creation, the Optionally, you can add titles and name. This is done by using the "Creation of names and titles," located in the panel operations. Then you need to view the last clip and save. Choose "Save to computer" on the panel, enter the name and define the folder to save it. Then double-click "Next" and wait for the creature to be saved. Done! Now you can play rezalt with any player, for example Windows Media.